How to Clean a Whiteboard Using WD-40 with Before and After Pictures

The problem- The white board eraser is not removing the marker. Step 1: Research online how to remove marker stains from a dry erase board. Step 2: Gather project materials (WD-40, paper towels, a bowl of hot soapy water, newspapers or a large posterboard). Step 3: Set up a workspace outside. Set posterboard or newspapers underneath the whiteboard. Step 4: Shake the can of WD-40 well before use. Step 5: Remove the lid from the can. Step 6: Insert the red tube. Step 7: Spray WD-40 directly on the marker stains. Step 8: Let WD-40 soak on the surface for a few minutes. Step 9: Use paper towels to wipe the board in circular motions. Step 10: Apply hot soap and water to remove WD-40. Step 11: Dry the surface with paper towels. Step 12: Repeat cleaning steps 7-11 until desired results are achieved. Step 13: Remove red tube from can and put the lid back on. Step 14: Clean up the workspace (throw out paper towels, clean the bowl, etc.) Step 15: Use the white board.