Hitch Revival

This project involved removal of surface rust from the hitch by cleaning and adding WD 40 to reduce the amount of corrosion from occurring over time.

Be sure to have all of the necessary tools, rags ,etc before starting the project.

Use a soft bristle wire brush to remove the surface rust. Exercise caution not to cause damage to the existing paint. Spray generously with WD 40. Use a rag to remove the rust and corrosion. Repeat this process until no additional rust or corrosion is present.

After no additional rust and corrosion are coming off, add a thorough coating of WD 40 to inhibit future rust and corrosion. Don't forget to install your hitch cover. The project is completed.
Safe towing and safe travels!